2012 Triumph Speedmaster Cruiser on 2040-motos

Triumph Other tech info

Type:Cruiser Phone:8557330225

Moto blog

New Triumph joins the family this Friday

With the nights drawing out it feels like an end to what has been a very long winter. I’ve been getting the train to work recently and if you’ve used London’s tube network in rush hour then you’ll know what I mean when I say the words ‘inhuman over crowding’. I had a call from the Triumph factory in Hinckley today and the good news is my new staff bike will be ready for collection on Friday.

Rain Forces Triumph Castrol Rocket Team To Look To Bonneville 2015

The past two weekends have produced more than three inches of rain and sad news for Bonneville land speed racing fans.Triumph has released it official statement regarding the announcement by Mike Cook’s Bonneville Shootout that the course will not be ready for its Triumph Castrol Rocket streamliner and others to make a 2014 FIM legal attempt at 400mph. This is not what you want to see the week before racing on the Bonneville Salt Flats. Photo courtesy Mike Cook’s Bonneville Shootout (landspeedevents.com) Mike Cook’s Bonneville Shootout streamliner runs were rescheduled for this weekend, October 4–5, after wet conditions earlier in the month prevented the runs on the long course required to run at these speeds.

Twin-Engined Triumph Rocket Streamliner To Challenge Motorcycle Land-Speed Record At Bonneville

The 1,000-horsepower Castrol Rocket is currently undergoing testing for its upcoming assault on the land speed record of 376.156 mph, set in 2010, by Rocky Robinson with the Ack Attack streamliner. The goal: a 400-mph-plus record-breaking run. The 25-foot long x 2-foot wide x 3-foot high streamliner was constructed in cooperation by Hot Rod Conspiracy and Carpenter Racing and will compete in the Division C (Streamlined) – Type V (5) Spark Ignition, Over 2,000cc to 3,000cc class. Powering the Rocket are two heavily modified Triumph Rocket III engines. Each Carpenter Racing built engine was reduced from 2,294cc to 1,485cc (2,970cc total) to meet the 3,000cc maximum total displacement class rule requirement. While piston size remains the same stock 4-inch bore, stroke was reduced from 3.75 inches to 2.4 inches and redline increased from 5,750 rpm to 9,000+ rpm. There’s also one Garrett GT2876R ball bearing, liquid-cooled turbocharger per engine.