Bobber Bobber Motorcycles, page #6

This bike is in beautiful condition. I am the only owner. I rode it quite a bit the year I bought it and only a handful of times since.

-1984 Honda Magna VF750- Canadian bike- 46,000km or 28,500mi- Frame converted to one seater and fully powder coated candy red, including dog bones for hard tail conversion, swing arm, and rims.- Buffalo leather spring seat with matching side bag.- Side mount for license plate.- Custom Harley style rear turn signals.- Integrated LED turn signals in head light.- fully custom quad exhaust.- New Dunlop tires front and rear.- Engine gaskets replaced, engine painted with high heat resistant paint, gloss black for the block and matt black for the covers.- Carbs were cleaned and balanced.- New cluster.- Ape hangers 10".- New coolant switch with new coolant.- New ignition wires, caps, heads and spark plugs.- Custom side mount choke cable.- Converted hard tail.- Wire harness tuck. 

 RODS & RIDES BT RACER The BT Racer is one of our #1 Selling Motorcycles for the last 7 years... With that being said, its not only the style of the machine with its unique flowing lines but also the seat, hand, and foot position that truly lets you be a part of the machine. The motorcycle is also not a little bike like so many others, it measures an whopping eight foot long and riders that are six foot plus look more fitted than any other bike in the market place.

Smooth, low and fast... this is a custom build 2013 Harley Soft Tail Bobber, 4.5 stretch mono shock has a 1978 xs650 Yamaha engine that is completely redone top and bottom with 277 rephrase crank and cam. 38 carbs with air pods, electric and kick start.

I built this bike about two years ago has developed an oil leak from head gaskets but runs good. I've changed gaskets and had heads machined but still leaks.

It's time to ride! Selling my 2000 Custom. 90 cu in.

       2012 CUSTOM BUILT BOBBER * S&S 110' MOTOR* 5 SPEED TRANSMISSION* 60 SPOKE FRONT WHEEL* SOLID ALUMINUM RER WHEEL* RIVERA OPEN BELT PRIMARY* FLAT BLACK PAINT* REAR SPROTOR* ONE OFF MEXICAN BLANKET SEAT* BUILT WITH THE BEST OF EVERYTHING LOW RESERVE

Super Clean Sucker Punch Sallys Sled.  Added 14 inch Chrome Ape Hangers, rear foot pegs and extended front controls. Bought brand new off show room floor in 2013.

This build was just completed and road tested.  This started out as a 91 HD FXSTS, everything has been redone to make it a vintage looking bobber.  Have a lot of custom fabrication done to it.

SPORTSTER WITH WIDEGLIDE FRONT END, FAT BOY RIMS, GROUND POUNDER STRAIGHT PIPES, CARBERATOR, PEANUT FLAT BOTTOM 1970's ,MODEL GAS TANK. BLACK 16" 1.25" APE HANGERS.

 RODS & RIDES 330 DROPSEAT BOBBER     The Dropseat Bobber is what put Rods & Rides on the map. This machine was built for not only speed and function but for the flowing lines as you can see. The massive 23" front tire and the outrageous 330mm rear gives this machine the ability to not only have a different stance than most motorcycles but offers a ride that is unreal.

THIS IS A 2016 CUSTOM BOBBER THAT I BUILT THIS YEAR FOR MYRTLE BEACH BIKE WEEK. IT IS A 240 REAR TIRE RIGID FRAME THAT IS 4 UP 2 OUT AND 38 ON THE NECK. THE FRONTEND IS A STOCK CHROME THAT IS 4" OVER AND A 5 DEGREE TREE.

You can not pass up owning this one of a kind motorcycle built by Russell Mitchell @ Exile Motorcycles. This is a beast of a bike !! $ 15,000 OBO willing to deal and all reasonable offers will be considered.  114 cubic inch TP Engineering Engine Jims Transmission with open belt primary Front and rear brakes operated by foot control Twist Clutch designed by Exile All fluids and gaskets have recently been replaced Carburetor cleaned and rebuilt New Battery

 This is a Cali Bobber, built by a reputable shop. Redemption Cycles California. Bike is 1980 750c Bobber Custom.

Hello Folks! What you have here is a 2003 Honda Shadow Spirit customized as one "badass midnight bobber". This bike is a beast.

I am selling my Old School Cool Sucker Punch Sally Shovelhead Bobber.   It is a Bar Burner with small peanut tank that has around 2 gallons capacity.    She originally sold for around $ 24,500.00 when new.

1 UP CUSTOM MOTORCYCLE JUST BUILT 2014 121' total performance moter 135 horse power less then 1500 miles on moter baker 6 speed transition chain drive 1 of a kind springier front end 23"frount tire custom spoke wheels custom seat custom paint MUST SEE TO APPRECIATE

Selling my Harley Davidson Sportser 1200 bobber bike runs and looks great. 1200ccsportster motor with points conversion "cleaner wiring" Bike has hardtail Paughco 0x30 frame. Have salvage title for motor as well as the bill of sale for Paughco frame"numbers stamped in frame by Paughco" owner will need to have bike inspected to be registered have all necessary paperwork.

         MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 25 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA MMW SCHWINN STYLE 23,23     BOARDTRACK RACER WITH HOOP  SPRINGER    SCHWINN STYLE    2016 MMW  SCHWINN  STYLE BOARDTRACK   23'S  FRONT AND BACK  .SET UP FOR HARLEY FACTORY AND AFTERMARKET EVO MOTORS ( CAN SET UP FOR OTHER HARLEY MOTORS )  .  RIGID ROLLING CHASSIS  SET UP FOR CHAIN   , , 35 DEGREE RAKE   ,SPECIAL  INCH BACK BONE STRETCH, SPECIAL UP STRETCH ,,  LEFT  SIDE DRIVE , ,, ,  CUSTOM  OIL TANK  /  ,  SPRINGER     FORKS       (OTHER FRONT ENDS AVAILABLE OLD SCHOOL SPRINGER , ,CONVENTIONAL)23X3.75 , 23X3.75 WIRE   WHEELS  ( CAN SWAP OUT WHEELS FOR OTHER STYLES ).   FRONT AND REAR   TIRES  ,      ,, NEW BEARINGS AND WHEEL SPACERS,  , CUSTOM   MMW GAS TANK  (SEVERAL TO CHOOSE FROM) ,  ,  RISER, BARS ,SPECIAL SHOCK    SPRING SEAT , KICK STAND , NOTE :THE SHEETMETAL HAS NOT BEEN MOUNTED   .

Custom Old Skool Bobber 2008 Up for sale is a 2008 Bobber Hard Tail Kraftech Frame with a 34 degree on the neck 2" stretch on the back bone, with Black Powder Coat. Power is delivered by a Rev Tech 110" backed by a Baker 5 Speed Trans, Left side Chain Drive PM Sprocket, Brakes Calipers, Foot and hand controls are also PM products. Custom Mikuni Carburetor and a Hooker Header with Titanium heat wrap.

 This bike is something that a project bike. Someone that had it before head taking off all of the wiring. So all of the wiring is fairly new wiring harness, new paint, New paint on the frame as well.